MTU FNER gas 20V4000L64 engine for MTU 20V4000GS gas genset
≈ ₹93.55
Hörsching7279 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+358 50 53...
Show
+358 50 5345498
+358 9 231...
Show
+358 9 23165797
Austria 
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Finland, Helsinki
France, Rouillac
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic
Condition: Brand New still in factory packaging
Model: 20V4000L64FNER
Volts: 11kV (11000 V)
Power rating: 2535 kWel
Frequency: 50hz
Speed: 1500 RPM
Engine:
Engine Model 20V4000L64FNER
Version 93800052350-V04-en-GB
Number of cylinders /
configuration 20V
Engine speed 1500 r/min
Bore 170 mm
Stroke 210 mm
Displacement 95.3 L
Lube oil Capacity 350 L
Exhaust gas emissions
NOx, stated as NO2
(dry, 5% O2)
< 250 mg/m³ i.N
CO (dry, 5 % O2) < 1000 mg/m³ i.N
Open skid mounting.
containerised solution available as well:
MTU 20V4000L64 powered by
❖ MTU gas genset of electrical power 2535kWe, 11kV,
50Hz , Pf=1, powered by MTU engine 20V4000L64
❖ ISO 40' High Cube Container
❖ Re-cooling system for engine and mixture cooling
circuit (without heat recovery)
❖ Generator output field including customer ‘s
connection
❖ MMC (MTU Module Control) for system control,
regulating ,diagnosis and protection
Features of Container version:
❖ Full transportability of the system (Rail, Road, Sea)
❖ Lloyd's CSC-certified (Convention Safety Container) for
trouble-free conventional transport (Rail, Road, Sea)
and stackable storage of the modules
❖ Plug & Play solution for the ease of “On site”
installation and operation
❖ Versatile use of the gensets (different operating
conditions)
❖ Weather-proof
❖ Minimum external dimensions, ISO 40’HQ container
❖ Proven tested design (Extensive testing before launch
as standard products)
❖ Combinable optional packages to suit various
demands
❖ Environment friendly provision (e.g. low noise level,
container floor sealed against leaking oil and water,
optional catalytic converter and CHP unit)
MTU Interface Panel (MIP):
Mounted directly on the base frame of all MTU
systems, the MTU Interface Panel (MIP) manages
engine and generator operation. It also controls
paralleling and synchronizing with other sources
of electricity, such as the utility or other generator
sets, and provides remote access and software
interfacing capabilities.
• Genset Control PLC
• Interface to Engine Control Unit ECU
• Interface to Alternator
• Bus interface to external (Modbus)
• On-base components cabled to MIP
MTU Module Control (MMC):
MTU’s highly customizable solution—the MTU
Module Control (MMC)—seamlessly links with
the MIP engine and generator set controls by
cable, making all vital data and functions
accessible to the operator from one convenient
location.
• Operator interface
• DC power supply
• Data Logging capability
• Remote connection to MTU available
• Control of off base components
The MIP/MMC consolidates the following controls and functions:
Generator Set Controls
• Starter Battery Charger
• Gas train control
• Engine oil system (refilling)
• I/O’s (Inputs/Outputs), auxiliary
drives
• Parallel/Island operation
• Load sharing
• PLC (Programmable Logic
Controller)
• AVR (Automatic Voltage
Regulator)
• Energy-Measure-Module –
controls
Engine Control Unit (ECU)
• Gas supply (mixture/lambda)
• Throttle / speed control
• Ignition control
• Turbo bypass
• Knocking detection / control
• Engine sensors / monitoring
• Emission sensor (NOx)
• Start / stop procedure
Accessory Controls
• Alarm system
• Data logging
• Visualization (webserver)
• MMC/MCS interfaces
(Ethernet)
• Customer interfaces (ex.
Modbus)
• HMI touchscreen
• Remote monitoring and
diagnostic