Weiler E120x3000 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Bühl-Weitenung
Working area:Center distance: 3000 mmCenter height: 600 mmSwing diameter over bed: 1200 mmSwing diameter over cross slide: 830 mmCross slide travel: 590 mmBed slide guide length: 860 mmTurning tool cross-section (H x W): 40 x 40 mmTool holder: Parat size 4
Center distance: 3000 mm
Center height: 600 mm
Swing diameter over bed: 1200 mm
Swing diameter over cross slide: 830 mm
Cross slide travel: 590 mm
Bed slide guide length: 860 mm
Turning tool cross-section (H x W): 40 x 40 mm
Tool holder: Parat size 4
Turning spindle:Spindle head DIN 55027 / 55026, size 15Spindle bore: 165 mmMain spindle taper: metric 171
Spindle head DIN 55027 / 55026, size 15
Spindle bore: 165 mm
Main spindle taper: metric 171
Main drive:Drive power (60% / 100% ED): 45 / 37 kWMax. spindle torque: 8000 NmSpeed range gear stage 1: 1–280 rpmSpeed range gear stage 2: 4–900 rpm
Drive power (60% / 100% ED): 45 / 37 kW
Max. spindle torque: 8000 Nm
Speed range gear stage 1: 1–280 rpm
Speed range gear stage 2: 4–900 rpm
Tailstock:Quill diameter: 140 mmQuill stroke: 300 mmQuill internal taper: MK 6
Quill diameter: 140 mm
Quill stroke: 300 mm
Quill internal taper: MK 6
Machine dimensions and weight:Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor)Overall width: 2600 mmOverall height: 2120 mmMachine weight: 11,500 kg
Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor)
Overall width: 2600 mm
Overall height: 2120 mm
Machine weight: 11,500 kg
Overhaul services:Hardening and grinding of all bed guidesGrinding of tailstock guidesOverhaul of the complete bed and cross slide assembly (grinding/scraping all guideways)Renewal of the bed slide's sliding liningRenewal or relining of the keyways and bottom guidesRenewal of all wipersReplacement of all beltsOverhaul of the main spindle assembly in the headstockRenewal of the X-axis including bearingsRenewal of the Z-axis including bearingsOverhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nutAdjustment of the tooling systemReplacement of the main spindle motorChecking of the auxiliary motors (X- and Z-axis)Overhaul of existing safety devices (sliding hood/jaw guard)Replacement of all rotary, toggle, and limit switchesReplacement of the spindle and handwheel encoderReplacement of the movable cables and coolant hoses in the work areaReplacement of the central lubrication unitRenewal of the energy chainsPainting according to specifications (standard textured basalt and light gray)Assembly and geometric inspection of the machine according to DIN 8605
Hardening and grinding of all bed guides
Grinding of tailstock guides
Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways)
Renewal of the bed slide's sliding lining
Renewal or relining of the keyways and bottom guides
Renewal of all wipers
Replacement of all belts
Overhaul of the main spindle assembly in the headstock
Renewal of the X-axis including bearings
Renewal of the Z-axis including bearings
Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut
Adjustment of the tooling system
Replacement of the main spindle motor
Checking of the auxiliary motors (X- and Z-axis)
Overhaul of existing safety devices (sliding hood/jaw guard)
Replacement of all rotary, toggle, and limit switches
Replacement of the spindle and handwheel encoder
Replacement of the movable cables and coolant hoses in the work area
Replacement of the central lubrication unit
Renewal of the energy chains
Painting according to specifications (standard textured basalt and light gray)
Assembly and geometric inspection of the machine according to DIN 8605
Additional equipment
1x used lathe chuck Ø630 mm with various jaws
1x used faceplate Ø1100
1x used steady rest, max. Ø300
1x used chip conveyor
application type: Turning
Location: Germany
machine type: Horizontal Turning Machine
control unit brand: SIEMENS
Control Brand: SIEMENS
Control Model: 810 D
Number of Axes: 2
Spindle Power: 45 kW