Nakamura Tome TW 10 metal lathe
Saint-Chamond
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
France, Saint-Chamond
France, Saint-Chamond
France, Location:grenoble
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
France, Saint-Chamond
marque: Nakamura-Tome TW 10 twin spindles twin turrets
Slant bed CNC lathe with live tooling
Make NAKAMURA TOME type TW 10
Subspindle
2 turrets 12 positions
comes from military
Tool probe
Bar feeder Sameca MUZ 12/65 x length 1850 mm
Chip conveyor
Spindle cylinder capacity 34 mm
Max. turning diameter 130 mm
Max. swing diameter over the telescopic guideways 180 mm
Max. turning length 160 mm
Distance between spindle dace and turret face max. 285 mm min. 85 mm
Max. distance between 2 spindles 765 mm
Main spindle motor 3,7/5,5 kW speeds 55 to 5500 RPM
Subspindle motor 2,2/3,7 kW speeds 55 to 5500 RPM
Spindle bore 47 mm and bore of the telescopic tube 35 mm (on both spindles)
Spindle height above floor 900 mm
X-axis 1 and 2 = 220 mm
Z axis 1 and 2 = 300 mm
Total main power required 37 kVA + bar feeder
Tour CN bi-broches bi-tourelles
Tour à banc incliné à commande numérique
4 axes avec fraisage (outils tournants)
provient du militaire
2 broches à pinces
Tourelles avec fraisage (outils motorisés)
Embarreur Sameca MUZ 12/65
Convoyeur à copeaux
Capacités des pinces en broche 34 mm
Diam maxi usinable 130 mm
Diam maxi admissible au dessus des protecteurs glissières 180 mm
Longueur de tournage maxi 160 mm
Distance entre le nez de broche et la face tourelle 285 mm min. 85 mm
Distance maxi entre 2 broches 765 mm
Broche principale 3,7/5,5 kW vitesse de rotation 55 à 5500 tr/min
Broche de reprise 2,2/3,7 kW vitesse 55 à 5500 tr/min
Alésage de broche 47 mm et alésage du tube télescopique 35 mm (sur les 2 broches)
Hauteur de pointe au-dessus du sol 900 mm
X 1 et 2 = 140 mm
Z 1 et 2 = 200 mm
Puissance totale requise 37 kVA + embarreur