Norte VS 1000 machining centre
Gräfelfing
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
+49 89 38031644
Germany, Location:essen
Germany, Location:stuttgart
Germany, Location:düsseldorf
Germany, Weißenfels
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Location:stuttgart
Germany, Kaiserslautern
Germany, Kaiserslautern
Marke: Norte
Manufacturer
NORTE
Year of manufacture
2002
Model
VS 1000
Type of machine
Milling Machining Center
Technical Details
Machine weight: approximately 28,000 kg
Transport width: approximately 12,000 mm
Transport depth: approximately 4,800 mm
Transport height: approximately 4,500 mm
Working area
X axis travel: 8,000 mm
with pendulum machining at vertical spindle
2 working areas of 2 x 3,765 mm
Working area
Y axis travel: 1,000 mm
Working area
Z axis travel: 1,000 mm
Feed range for X and Y axis: 1 to 20,000 mm per minute
Feed range for Z axis: 1 to 20,000 mm per minute
Maximum feed force X
Y
Z axis: 15,000 N
Rapid traverse X and Y axis: 20,000 mm
Rapid traverse Z axis: 20,000 mm
Protection class of feed drives: IP 64
Voltage: three phase current 400 / 240 V
3 phases / MP / 50 Hz
Control voltage with transformer: 24 V DC
Supply cable: minimum 4 x 35 mm2
Main fuse: maximum 200 A
Connected load: approximately 130 kVA
Control system: Siemens SINUMERIK 840 D
Drive system: Siemens SIMODRIVE 611 D
Axis drives AC: digital control
Spindle drive AC: digital control
Clamping table
total clamping surface left: 8,120 mm x 1,050 mm
Clamping table
working area with 2 working areas: pendulum machining
Clamping table
working area per working area at vertical spindle: 3,725 mm x 1,000 mm
T-slots: 7
according to DIN 650
Clamping slots: 6
Alignment slot (center slot): width 22 mm H7
Slot spacing: 150 mm
Permissible table load: 8,000 kg
Working spindle
inner bearing diameter: 100 mm
Spindle bearing lubrication: oil / air
Tool holder: HSK-A 100
Tool clamping force: 45,000 N
Spindle speed range: 0 to 8,000 min-1
Automatic tool changer type: chain magazine
Chain drive: regulated AC digital servo motor
Mounting position viewed from front: centered in the column
Tool change point: variable in the X
Y and Z axis
Tool loading: from the front via the working spindle
alternatively via pick-up station
Number of magazine positions: 90
Tool shank: HSK-A 100
Coding: variable position coding
Maximum tool diameter with 1 magazine position occupied: 110 mm
Maximum tool diameter with 3 magazine positions occupied: 180 mm
Maximum tool length: 400 mm
Main components: machine bed
which forms the base structure of the machine
Cross slide
which carries and positions the working assemblies
Machine column
which supports the spindle housing
Spindle housing
which houses the working spindle drive
Drilling and milling spindle
which performs the drilling and milling operations
Table
including rotary table and tailstock
which holds the workpiece
Complete cabin
which encloses the working area
Working area
where machining takes place
Tool magazine
which stores tools for automatic tool change
Main control panel
used to operate the machine
Electrical cabinet
which houses the electrical control components
Hydraulic unit
which supplies hydraulic power to the machine
Pneumatic unit
which supplies pneumatic power to the machine
which lubricates the machine components
Cooling unit for the main spindle
which cools the spindle during operation
Chip conveyor
which removes chips from the working area
Coolant system
which supplies coolant during machining
Extraction system
which removes dust and particles from the working area
Pick-up tool magazine
used for alternative tool loading
Find more here
show contacts
Contact us at
show contacts