CME FA-0 machining centre
≈ ₹2,088,000
Ramalhal7374 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+351 966 99...
Show
+351 966 999 459
+34 619 02 ...
Show
+34 619 02 07 05
Portugal 
Portugal, Marinha Grande
Weight on the bench: 2Tn
DEPTH MEASUREMENTS: 2865 MM
Fast forward: 30m/min
Work advances: 20mm/min
spindle power: 22 Kw
Cone type: ISO-40
control: Heidenhain TNC i530
Chip extractor: yes
net weight kg: 2000
Quantity in Stock: 2
iso: 50
Table (X axis): 1020mm
T-slots: 3x14 mm
Longitudinal course: 1000 mm
Transverse slide displacement: 280 mm
Longitudinal advance mm/min: (8) 30 - 740
Transverse feed mm/min: (8) 30-740
Vertical advance mm/min: 10-168
Vertical slides mm/min: 600
mandrel cone: ISO40
Max. spindle speed: 4000 rpm
Table feed mm/min: Automatic
table rotation: +/-35
kW power: 0.04/0.053
mm dimensions: 2300x2200x2115
number of speeds: 11
Kw spindle power: 3
piston displacement mm: MANUAL
Ram stroke mm: 600
Minimum spindle speed: 20 rpm
Maximum spindle speed: 12,000 rpm
Max spindle power: 14,5 kW
Maximum spindle torque: 121 Nm
Tool storage capacity: 20 pcs.
Maximum tool diameter: 80 mm
Maximum tool length: 300 mm
total machine weight: 8800 kg
Quantity in Stock: 2
course x: 1300 MM
course y: 400 MM
course z: 500 MM
Saddle (Y axis): 610mm
Head (Z axis): 610 mm
X/Y/Z axis: 1150/700/550 mm
Number of T-Slots: 5
Auto Mode (Z axis): 36/min
x/y/z acceleration: 6/5/4m/s2
Minimum Increment: 0,001mm
Control: Heidenhain 6951/6951/11519N
X,Y,Z axis speed: 36 m / min
work surface: 1200 x 600mm
Maximum weight on the table: 1500 kg
Axis displacement: 1200x750x750 mm
Maximum height on the table: 820 mm
table size: 60" x 30"
Table Capacity: 3,300 pounds.
X Axis Course: 60″
Y Axis Course: 30″
Z Axis Course: 30″
HEIGHT MEASUREMENTS: 3079 MM
X AXIS MOVEMENT: 1600 MM
Y AXIS MOVEMENT: 920 MM
main engine: 15 / 22.5 hp
Electric: 230V/3PH
spindle taper: CAT40
Table dimensions: 1400 x 750 mm
spindle speed: 4,000 rpm
Z AXIS MOVEMENT: 844 MM
PIECE WEIGHT: 3000 KG
MACHINE WEIGHT: 12000 KG
table load: 900kg
Spindle motor power: 22 kw
MEASUREMENTS WIDTH: 4136 MM
CME FS-0 vertical machining center. Working at full capacity.
Mesa: 1300x700 mm
Peso na bancada: 2Tn
Avanços rápidos: 30m/min
Avanços de trabalho: 20mm/min
Velocidade do fuso: 4.000 rpm
Potência do fuso: 22 Kw
Tipo de cone: ISO-40
Controlo: Heidenhain TNC i530
Extrator de aparas: sim
Máx. velocidade do fuso: 4000 rpm
Potência do motor do fuso: 22 kw
Centro de maquinação vertical CME FS-0. A trabalhar em pleno.